PLEASE NOTE: WE ARE NO LONGER OPERATIONAL. THE SITE REMAINS ONLINE FOR INFORMATIONAL PURPOSES ONLY.

Bluey Technologies BluCem FSC

Fast Set Concrete (20-35MPa @ 3 hrs)

BluCem FSC has been designed as a cementitious binder that can be mixed with coarse and fine aggregates to produce a rapid-set concrete. BluCem FSC is suitable for batching near to site, in transit mixers or volumetric mixers, for fast placement where development of high early strength for early return to service is required. BluCem FSC does not contain chloride or lime based accelerators to achieve its early strength. For added durability, the product also utilises engineered alkalinity to inhibit corrosion and protect reinforcing steel. BluCem FSC is specifically designed to be applied using volumetric based continuous mixers.
  • Overview

    Videos

  • Description

    USES

    BluCem FSC is designed for use in construction of concrete structures and pavements where only a short window of time is available to complete the works and return the asset to service, such as:

    • Airport runways
    • Concrete road pavements
    • Rail bridges
    • Car parks
    • Sewer structures
    • Industrial process plants and mining infrastructure
    • Precast concrete panels
  • Performance

  • Compliances and Accreditations

    Compliances

    • RMS Approved
  • Systems & Installation

    Installation

    MIX DESIGN

    1.1 Select suitable coarse and fine aggregates.
    1.2 Design a concrete mix within the water cement ratio and powder proportion ranges using BluCem FSC.
    1.3 Carry out laboratory trials to validate work time, workability and early strength gain targets.

    TRANSIT MIXER

    2.1 Use BluCem FSC.
    2.2 Erect access platform for safe unloading of bulk bags of BluCem FSC into mixer or use a cement powder unloader with hopper and elevating screw conveyor.
    2.3 Load potable water into mixer.
    2.4 Load aggregates into mixer.
    2.5 Load BluCem FSC powder into mixer.
    2.6 Travel to pour location while mixing.
    2.7 High speed mix for three minutes.
    2.8 Discharge concrete into place, vibrate and finish as required within the work time established by trial mix.

    VOLUMETRIC MIXER

    3.1 Use BluCem FSC loaded into the powder bins of the Volumetric mixers.
    3.2 Load potable water, aggregates and BluCem FSC into the mixer storage compartments in a safe manner.
    3.3 Locate mixer beside pour location.
    3.4 Mix concrete volumetrically and discharge.
    3.5 Vibrate and finish as required within the work time established by trial mix.

  • Compatible Products

    No compatible products found

  • Spec Clause

    Spec Clause

    FAST SET CONCRETE - The cement for this project should be based on a calcium sulpho-aluminate cement system which requires only the addition of aggregates and water, to a maximum of 0.4:1, to provide a durable concrete with high strength gain in the first few hours after mixing. It shall be a cement product that has independent testing to validate the performance outlined in the technical data table on the following pages. BluCem FSC manufactured by Bluey Technologies or equivalent will be accepted. To meet durability requirements, the fast set cement shall not contain chloride or lime based accelerators.

  • Projects & Installers

    No example projects listed

  • Downloads

    Bluey Technologies BluCem FSC

    Fast Set Concrete (20-35MPa @ 3 hrs)

Your compare list

Compare
REMOVE ALL
COMPARE
0
linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram